ABOUT OUR COLOUR OFFER

Orica Powder Coatings offer a large range of powder Coating chemistries and colours on an ex-stock basis in New Zealand. The four Colour Cards categorise the chemistries broadly into their end use, however, most powders can be used over most metallic substrates.

Orica Powder Coatings also offer a made to order service, which is able to produce an almost infinite colour range and finish type, subject to minimum quantity provisions and "fit for purpose" considerations.

OUR COLOUR RANGE

Duralloy^® Colour Guide

The Duralloy Colour Guide illustrates 70 Duralloy colours held in stock in New Zealand. The Duralloy product is warrantable when applied to suitably prepared Aluminium extrusion by an Orica Registered Applicator in compliance with the parameters detailed in the Duralloy Applicators manual.

Duralloy offers a 10 year colour retention and 10 year film integrity warranty on residential developments and small commercial projects in New Zealand. See Architectural specification for guidance on the appropriate use of Duralloy.

Whilst Duralloy was formulated with Aluminium joinery as the targeted substrate, Duralloy is equally at home in industrial applications over a variety of substrates.

An MTO service increases the range of colours available in this chemistry.

The Duratec^® Brochure and Colour Card

In addition to providing valuable information regarding the specification and application of Duratec, the Duratec brochure illustrates 16 Colours held in stock in New Zealand by Orica Powder Coatings. The Duratec product is warrantable when applied to suitably prepared Aluminium extrusion by an Orica Registered Applicator in compliance with the parameters detailed in the Duratec Applicators manual.

Duratec, offers a 10 year colour retention and 10 year film integrity warranty for major residential and commercial developments.

An MTO service increases the range of colours available in this chemistry.

The Pacificgold^® Industrial Colour Card

72 colours are illustrated on the Pacificgold Industrial colour card, with most of these colours available ex-stock. There are five colours listed as made to order, this for a variety of reasons including chemistry. The colours are all related to a sun fade index that splits the colours into three categories.

A sun fade index of 1 denotes a UV stable colour with very low fade potential.

A sun fade index of 2 denotes a colour that will fade on exterior exposure. The degree of fade varies from colour to colour with generally the brighter colours showing obvious fade with the first 2 years.

A sun fade index of 3 indicates that this coating should not be considered in an exterior environment.

In general, the Pacificgold colour range has been designed for industrial purposes, however, some of the colour range would be equally at home on Aluminium Extrusion, please contact us for more information.

Trimatrx^® Brochure and Colour Card

As with conventional powder coating, the colour range for Trimatrx is enormous. Virtually any colour, including pearl and/or textured finishes can be produced by Orica on a Made To Order (MTO) basis.

For inspiration, Orica has launched the following colours as its initial Trimatrx stock range. Derived from market trends, this eclectic colour selection is ideal for either subtle subdued environments or where a bold statement is desired. With a spectrum of colours available, let your imagination run free.

At this stage, Trimatrx is predominantly produced in a low gloss / matt finish. If you are seeking a higher gloss finish, contact an Orica Representative to discuss new technology developments, including Orica Xienta.

Due to variations in computer monitor screens and colour printers, the colours represented are indicative only. For a closer representation of colour, request an original copy of a colour chart or swatch of a specific colour by accessing the Make An Enquiry page.

Disclaimer: Due to variations in computer monitor screens and colour printers, the colours represented in the PDF file links below are indicative only. For a closer representation of colour, request an original copy of a colour chart or swatch of a specific colour by accessing the Contact us page.